Aviation Hangar Flooring in Las Vegas, NV
Concrete Like New installs high-build epoxy and polyaspartic flooring systems for aviation hangars across the Las Vegas Valley, built to resist fuel, hydraulic fluid, and de-icing chemical exposure while handling heavy equipment loads and large open bay areas. We work with hangar operators and FBOs to schedule around flight operations and aircraft movement, and we specify systems rated for the specific chemical and load demands of a working hangar rather than a standard industrial coating. Every project starts with a free, on-site assessment.
What Hangar Operators Need to Know
Hangar floors combine several demands most industrial spaces don’t face together: large open spans that need to cure evenly, fuel and hydraulic fluid exposure, heavy point loads from aircraft jacks and ground support equipment, and in many cases, a need to reflect light well for maintenance visibility. A coating that isn’t specified for this combination can stain, degrade under fuel exposure, or fail under concentrated equipment loads.
Durability: Chemical-resistant epoxy and polyaspartic systems resist fuel, hydraulic fluid, and de-icing chemicals better than sealed or bare concrete.
Downtime: Large hangar floors benefit from polyaspartic’s faster cure time, which matters when hangar space is a limited, high-value asset.
Load capacity: High-build systems handle point loads from aircraft jacks, tugs, and ground support equipment without cracking or delaminating.
Warranty: Warranty terms specific to your installed system are confirmed in writing as part of your project quote.
Systems We Recommend for Hangar Floors
Faster cure across large floor spans, UV-stable for hangars with significant natural light.
A durable option for back-of-house, mechanical rooms, or loading areas within an office building.
Light-reflective topcoat options can also improve visibility for maintenance work — we discuss this during your on-site assessment if it’s a priority for your operation.
Built for Las Vegas Hangar Conditions
Southern Nevada heat affects large-span concrete floors differently than smaller commercial spaces — expansion and contraction across a big open bay puts more stress on a coating system than in a typical warehouse. We specify systems and joint detailing suited to large-format industrial floors so your hangar coating performs consistently across its full footprint.
How We Work With Hangar Operators
- Site visit and operational review. We walk your hangar, review equipment, fuel handling areas, and floor condition across the full span.
- System recommendation. Based on your specific operation, we recommend a coating system with tradeoffs clearly explained.
- Scheduling around flight operations. We coordinate installation timing with your operational calendar to minimize disruption to aircraft movement.
- Dustless prep and installation. Mechanical grinding and repair across the full floor span, then coating application and cure.
- Walkthrough and sign-off. Clear guidance on cure time before equipment and aircraft return to the floor.
Why Hangar Operators Choose Concrete Like New
- One point of contact, start to finish, with a team that understands large-format industrial installs.
- Scheduling built around flight and maintenance operations.
- Systems matched to fuel, fluid, and load demands specific to aviation use.
- References available on request from prior industrial clients.
Frequently Asked Questions
Timeline depends mainly on total square footage — often substantial for a hangar — and the system specified. We confirm an exact, written timeline as part of your quote once we’ve seen the space.
Chemical-resistant epoxy and polyaspartic topcoats are formulated to resist fuel, hydraulic fluid, and de-icing chemicals far better than bare or sealed concrete. We’ll recommend the system rated for your specific exposure.
High-build coating systems are designed to handle concentrated point loads without cracking or delaminating. We assess your equipment types during the site visit to confirm the right system spec.
Yes — proper joint planning and application technique are part of how we handle large-format floors, and we discuss this specifically for spans of your size during the assessment.
Yes, we coordinate installation timing with hangar operators to minimize disruption to aircraft movement and operations.
Light-reflective topcoat options are available and can be discussed as part of your system recommendation if visibility is a priority for your maintenance operations.
Both use similar core coating systems from our industrial flooring lineup, but hangar floors are specified for fuel and hydraulic exposure and large-format spans specifically. See our warehouse floor coating page for that use case.
Every project starts with a free, on-site assessment. Contact us and we’ll provide a detailed written quote for your facility.
Request a Hangar Floor Assessment
Get a free, on-site assessment and a written quote built around your operational schedule and hangar size.
Call (702) 978-8465 for a FREE consultation!
